infinity cm2qlm dongle Care Suite Emergency

Even after installing Qualcomm USB drivers, you might encounter problems getting Infinity Chinese Miracle II Qualcomm module to detect your Qualcomm Android phone in Emergency Download (EDL) mode. The reason is that the tool would only detect your phone with Nokia Emergency driver installed and not Qualcomm HS-USB QDLoader 9008 .

First off, you need to get the phone into EDL mode using the button combo and take note of what the phone gets detected as. If it gets detected as QHSUSB_BULK then you’re good to go. If it gets detected as Qualcomm HS-USB QDLoader 9008 then you first need to right-click this entry and select Uninstall driver (tick the box which says Uninstall driver software for this device ). Once Qualcomm HS-USB QDLoader 9008 has been uninstalled, disconnect the phone from PC, take out the phone’s battery and reinsert (you can just power on then power off if your battery is inbuilt) then boot the phone into EDL mode again. It should now get detected as QHSUSB_BULK once reconnected to PC.

Once detected as QHSUSB_BULK, leave the device connected and download this file then unzip and install the exe.

After installing the exe, navigate to C:\InfinityBox\CM2QLM\Drivers and install WinUsbCoInstallers ,WinUsbDriversExt and  EmergencyDownloadDriver . After installing these 3, disconnect the phone and power off (either by powering on then off or by removing and reinserting the battery)